A DIY waterfall butcher block washer and dryer counter is a great way to add functionality and style to your laundry room. This project involves building a counter around your washer and dryer, creating a seamless and cohesive look. It is a relatively simple project that can be completed in a weekend with the right tools and materials.
Materials needed:
- Butcher block countertop
- Plywood
- 2×4 lumber
- Wood screws
- Wood glue
- Stain or sealant
- Paintbrush
- Circular saw
- Jigsaw
- Drill
- Countersink bit
- Measuring tape
- Level
Instructions:
Step 1: Measure and cut your plywood
Before you start building your counter, you need to measure the dimensions of your washer and dryer. You’ll need to create a template out of cardboard or paper to ensure accuracy. Once you have the measurements, use a circular saw to cut the plywood to the appropriate size. The plywood should be the same height as your washer and dryer.
Step 2: Cut the butcher block
Using a jigsaw, cut the butcher block to the same size as the plywood. You can also have it cut to size at a home improvement store. Sand the edges of the butcher block until they are smooth.
Step 3: Create the frame
Using 2×4 lumber, create a frame around the washer and dryer. The frame should be the same height as the plywood and should be screwed into the wall studs for stability. Use wood glue and screws to attach the plywood to the frame.
Step 4: Attach the butcher block
Using wood glue and screws, attach the butcher block to the plywood. Make sure to countersink the screws so they don’t stick out and create a rough surface.
Step 5: Stain or seal
Once the butcher block is attached, you can stain or seal it to protect the wood and give it a finished look. Follow the instructions on the stain or sealant you choose. You can also paint the plywood frame to match your decor.
Step 6: Install the sink (optional)
If you want to add a sink to your counter, you can do so by cutting a hole in the butcher block and installing the sink. Follow the manufacturer’s instructions for installation.
Step 7: Enjoy your new counter
Once everything is installed and sealed, you can enjoy your new DIY waterfall butcher block washer and dryer counter. It’s a great way to add style and functionality to your laundry room.
Tips:
- Make sure to measure carefully before cutting any wood.
- Use a level to ensure that everything is even and straight.
- Choose a stain or sealant that is appropriate for butcher block countertops.
- If you’re not comfortable with cutting the butcher block, have it cut to size at a home improvement store.
- Don’t forget to countersink your screws to avoid rough surfaces.
Conclusion
A DIY waterfall butcher block washer and dryer counter is a simple and stylish way to add functionality to your laundry room. With the right tools and materials, you can complete this project in a weekend and enjoy the benefits for years to come. Whether you choose to add a sink or keep it simple, this counter will be a great addition to your home.